K'nex Dual-Motor Powered Wheel-Tank

I originally made this tank for off-roading outside. But it quickly proved to not be an off-roader, but instead be an indoor pulling tank (although it doesn't pull as much as my old K'nex Monster Max which can pull a box full of 1 pound ankle weights). I've put it through many tug-of-war matches, and with Monster Max now disassembled, it has claimed the top spot. But Monster Max still has a place: on the top of the tank - The tank's cab is Monster Max's old cab. But enough about MM. Here are some stats:

Power: 6/10

Off-road: 8/10

Traction: 8/10

Deleted >:(

NOT recounting, sorry.

But if anyone is kind enough to build it and count the pieces, I will be more than happy to put them here!

1. Make
2. Add plates
3. make
4. add rod
5. attach
6. attach
7. attach
8. get
9. add
10. add to all
11. done!

1. make
2. make
3. l l
4. l l
5. make
6. attach
7. attach, and done!

This is the engine. Make this. Note the brace.

1. make
2. make
3. l l
4. attach
5. make
6. attach
7. l l
8. done!

1. make
2. make
3. l l
4. l l
5. attach
6. make
7. attach
8. l l
9. done!

A step by step assembly of all the pieces.

Congrats! You've now made a K'nex wheel tank. This one in particular was actually modeled after the Ripsaw EV2 tank. Only it has tracks, not wheels. This tank is pretty heavy and doesn't have a lot of surface area on the ground, so if it gets stuck, it can REALLY gets stuck. But, as always, thanks for having a look, and hope to see you on the next one! Bye for now!