Knex Colt Revolver

This is the Knex Colt Python revolver from Call Of Duty that I copied from Zombiekiller-93 and matthew9876 but I modded some parts like a working hammer. (This is a model so it wont shoot but the hammer works) This is not my own creation so all credit goes to Zombiekiller-93 and matthew9876.

1. 60 green 16mm rods
2. 13 white 32mm rods
3. 1 blue 54mm rod
4. 1 orange 86mm flexi rod
5. 3 white 8-way connectors
6. 2 blue 7-way connectors
7. 22 yellow 5-way connectors
8. 3 green 4-way connectors
9. 6 red 3-way connectors
10. 1 light grey 2-way connector
11. 11 orange 2-way connectors
12. 8 blue clips
13. 2 tan interlocking clips
14. 2 purple clips with hole end
15. 2 light blue spacers
16. 21 black clips with rod end
17. 5 black/light blue hinge assembled

Broken/cut pieces

1. 12 white 32mm rods with ends cut off
2. 6 blue 54mm rods with ends cut off
3. 1 yellow 5-way connector with 3 of the connectors cut off
4. 6 white 8-way connector with 2 of the connectors cut off

This step might be a little tricky.

Have fun with it and leave a comment!