Knex Claymore

by iKill in Living > LEGO & K'NEX

15271 Views, 10 Favorites, 0 Comments

Knex Claymore

Ins-0004.jpg
Ins-0002.jpg
Ins-0001.jpg
Ins-0003.jpg
Not particularly meant to be used, but if for some reason your a messed up person you probably shouldn't look at this. Please be very careful because as killerk said this gun is very powerful.


Disclaimer: anything that happens because of this is in no way my fault. it is your choice to read and construct this item.

Gather Materials

Ins-0001.jpg
Ins-0002.jpg
Ins-0003.jpg
All you need:
Duct Tape
KillerK Basic Knex Pistol
Wire
A door or door way

Tape Gun to Wall

Ins-0004.jpg
tape it onto the door frame make sure that the projectile can come out

Note: also make sure the trigger is facing you NOT THE WALL

Attaching the Trip Line

wind the wire around the lower hinge of the door and then up to the trigger on the gun and make a loop

Note: the gun must be higher than the lower hinge so it gets pulled down

Setting Up

Load the projectile( a few wall nails)- cock the gun- hook the loop- crawl under- close the door