Knex Ferris Wheel

This is my first Instructable, but feel free to post harsh comments as long as they help me. This ferris wheel has 8 individually swinging cars. PLEASE RATE

Piece count (colors are from original sets)

Rods
green-16
blue-40
yellow-20
red-25
gray-33

Connectors
gray 1 slot-19
gray 2 slot-16
red 3 slot-2
green 4 slot-20
yellow 5 slot-16
white 8 slot-2
blue 3D piece-24
purple 3D piece-4
orange 2 slot opposite sides-5

Other
Tiny blue connector-1 (can substitute for a gray 1 slot)
tiny tan connector-2
gray spacers-24 (can substitute 3 blue for a gray
blue spacers-4

TOTAL-273

This is the base of the ferris wheel.

pic 1.the base
pic 2.make 2
pic 3.make 1
pic 4/5.right and left side
pic 6.put on back.
pic 7.make sure it is like that in the middle
pic 8.put on the other side the same way

This is the wheel and the cars.

pic 1.the wheel and cars
pic 2.make 2 of these
pic 3.add vertical gray/yellow connectors
pic 4.connect the top
pic 5.make 8 of these
pic 6.same
pic 7.attach to the wheel (can change direction if desired)
pic 8.yay. You are done

The title says it all

pic 1.tan connectors on inside facing out. 3 gray spacers on each side
pic 2.blue rod through and add pieces
pic 3.another pick
pic 4.add 2 gray and 2 blue, put on motor, and put on blue piece
pic 5. make sure it goes between the 2 gray rods

CONGRATULATIONS!!!!! YOU ARE DONE

None yet