Kitchen Sink Holder

This is made out of cardboard as just a proof of concept because I don’t have a 3D printer I am aware that this will not work because of that fact I just wanted to show what it would look like in the end

Step 1: Materials and Tools

Materials
Tape/glue what ever you have but glue is better
Cardboard
Tools
Pencil
Ruler
Scissors/knife what ever you are better with

Step 2: Cutting

Cut out the parts using the diagram below for reference. It does not have to be exacts because we are using cardboard so you can bend it. After cutting it out you should have 9 parts

Step 3: Gluing Main Body

Gluing or taping does not really matter gluing will be more stable but tape also works.
It does not matter how you tape or glue it together how I did it was first the 3 large parts then the 4 by 4s

Step 4: Gluing Hook

The hook is the hard part because of the 2 parts sticking up from kitchen gloves what you will want to do is make the hook glue that to the body then add the gloves part as showed in the picture.

Step 5: Your Done

This is just a example of the idea ideally it would be 3D printed so that it could have the sturdiness I will leave a link to the tinkercad if you want to 3D print it. https://www.tinkercad.com/things/laTiSOocjS6-super-lappi