Kibret, Hunter, Sergio, Mateo, Bottle Rocket

Steps for making our Bottle Rocket.

We cut the bottles in half with an exacto knife and kept the sides of the bottle that you drink from because the other halfs were not needed.

Next we put both sides of the bottles together and taped them together.

We then started to cut the fins out of cardboard with an exacto knife.

We then took the fins and started to put them on to the bottom part of the rocket with a hot glue gun. So we repeated this step 4 times around the rocket with one fine on the four sides of the rocket.

Then we took the top part of the rocket and started to put the rest of the four fins on the four top sides of the rocket.

Our final step was putting the cardboard cone on the top of the rocket with tape.