Keyboard Initial Bracelet

by trecords in Circuits > Reuse

3428 Views, 12 Favorites, 0 Comments

Keyboard Initial Bracelet

5485788973_5a04de9790.jpg
A keyboard to destroy for a contest.  One of 3 kicking around the basement.  

The Wrist Band

5486390318_4570a7606a.jpg
5486394544_da272b7d34.jpg
Multi core cabling provides plenty of length and colors to work with.  I ditched the gray and braided the red, yellow, and brown together.

Key Prep

5485799035_f08047bf4a.jpg
5486397312_7a8c1c2c3b.jpg
Grind of the post on the bottom of the key so that it lays flat on your wrist and drill holes in each side of the key to thread the wires through.

Check It Out

5486418726_c5fdc0ac2d.jpg
Braid the wires on the other side of the key and measure for length.  I actually braided too much and had to trim it back later.

Clasp

5486400912_ffc5b6a1da.jpg
5486414644_d27e825c9f.jpg
5485810891_500fe5de50.jpg
Make a clasp from the internal keyboard cable connector.