Key Chain Out of Electronic Board

on this Instructable i will show u how o make key chain out of Electronic board from old key board , this chain is just shape it doesn't able to work only if u can light up the LED that i removed and add small lithium battery but sorry because i don't know the connection of circuit for now, so if you want see my other Instructables u can find it at my profile or visit my page on facebook : 
https://www.facebook.com/CreativityWorkShop?fref=ts

tools you need:
cutter
Key Ring Components
drill
Alicate turquesa
black ( or any color you want) spray

remove the green layer from the board to show the shiney part of it by using cutter

our work now is on the second side so we cut part of sticky glued paper to form the shape of the circuit

paint them with spray at the both sides

remove the the layer to show the shine layer again and remove the paper ater drying 

now drill the hole were we put the ring and component , to fix them use Alicate turquesa 

now the both side is done and it is ready to add key so thank u for watching my Instructable and i am sorry or all this steps it just simple but i want to make sure that everyone understand don't forget to see my other Instructable.