Kenx Doomsday Dozer





Hey guys. this is a giant bulldozer i made with kenx. It has a giant blade, tire chains (if it gets stuck), and it has a scraper on the back. Enjoy!
The Blade.
















To make the blade we will start by making these to arms with these hooks on the end. Then make this piece in the fourth image. Then put together four green connecter's and then put gray rods on all the holes left accept the bottom one. Then take red connecter's and do what is in the image. Then take that piece you made in image four and put it in the empty hole. Put on the arms like so and do the rest.
The Cab.















For the cab you will just have to do what is in the images. If you have a man you can put it in and the flex rod can be any color. The gray plates are up to you if you have them you can use yellow connector's with green rods on the end.
Front Body.







Make what is in the second image then make the second on make. Make this thing and then add the to parts you made and put them on the sides.
Front.















You will use the first image as a base for this step so, once you build that you can make the next step. Make this part and make sure the green rod on the top is in the middle. Take it and put it on the bottom of the white part on the front. then make this and put it on the top of the base. Then make these two pieces and put them on the sides.
Back.













make this top part then make this part and then make this part with the wheels. It is two big wheels put together. then put the two base together and put the top on.
Odd Bits.





















these are up to you if you want to make them they make the dozer look better. Make these too ladders and these tracks. Next make this part then add these on both sides then fill in the middle make this part and put them together. Next make these to parts and put them on both sides with a rubber bands, tires and cap it of with one of these. Then put the scraper on the back and hook the bands on. Then put the chains on like this.
Assembly.








hook the front to the front body and put the cab on the front body. Then put the blade on and put bands on like in the image. Then put a red(green)rod in the back like in the image and put the back on and clip the rod to the white part under the cab.
Done

All done!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!