Kendo Beater

by Betty Chih in Circuits > Arduino

194 Views, 1 Favorites, 0 Comments

Kendo Beater

205080144_126418332870413_3183050098682060867_n.png
207200125_1481268685554170_6750716596885370859_n.jpg

這是一個劍道擊球手,用於提高擊球的精度。

Supplies

鐵絲
麵包版

LED燈

反應性

夾夾

木頭

鋁箔

一面九月

紙板

剪刀

工具刀

熱熔膠

Assembly

199762951_396922055016722_2478345708154083411_n.jpg

Cut the wood to the required length and assemble it with hot melt glue.

Write Program

203622218_776785726318051_5357131659441393433_n.jpg

Now let's write the program.

The program is written with the switch light in the switch principle.

Then set the program into the Arduino board.

Induction Place Production

206846329_395424781849348_3349363840385393580_n.jpg

Cut the cardboard to an appropriate size and fold it in half.

After cutting the aluminum foil paper, paste it on the cardboard with double-sided tape.

Finally, use an alligator clip to clamp each of the two pieces of cardboard.

Remember that the alligator clip must touch the aluminum foil, and there are two pieces of cardboard that cannot be touched.

Complete Production

剑道打击器 Kendo Beater
204742678_492899561975739_9192381691189753559_n.jpg
202278370_490782028852510_1394103904589911170_n.jpg

一開始我選擇破壞是因為我之前在劍道,但每次使用訓練器進行打擊時,我都只在特定的地方是否合適。所以我決定做一個劍道球手。我們的正確準確率如果。只要擊中正確的點,它就會變顏色,沒有,它的顏色將保持不變。