Katamari Cousin Christmas Decorations

by alittlestranger in Craft > Sewing

9292 Views, 78 Favorites, 0 Comments

Katamari Cousin Christmas Decorations

front.jpg
tree3.jpg
cousins1.jpg
cousins.jpg
tree1.jpg
tree2.jpg
These Katamari decorations are a great way of using little scraps of felt and ribbon to make brightly coloured decorations for your geeky Christmas tree!


This instructable is a Christmas two-parter with this Katamari Ball Tree Topper

A new instructable every week on www.alittlestranger.com

You Will Need:

materials.jpg
materials2.jpg
katamari.jpg
a) Felt scraps
b) Ribbons in bright colours
c) Embroidery thread
d) Lighter (to seal ribbon edges)
e) Marker pen
f) Needle
g) Sharp scissors

Optional (not pictured):
h) Pins
i) Toy stuffing

Printed copy of the pattern


Get All the Parts Read

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
1) Cut out template pieces

2) Mark the head shape twice onto your main felt colour using your marker pen. Cut out using sharp scissors.

3) Mark the ends of the head twice onto your secondary felt colour using your marker pen. Cut out using sharp scissors.

4) Mark the face onto flesh coloured felt using your marker pen. Cut out using sharp scissors.

5) Make the face border. Line up your face piece with the edge of your border colour. Use embroidery thread and little evenly spaced stitches to sew the face onto your.

6) Trim away the excess leaving a 2mm border around the face.

Sew Everything Toegether

7.jpg
8.jpg
9.jpg
10.jpg
11.jpg
7) Pin all the felt pieces in place.

8) Sew face on using embroidery thread. Use neat evenly spaces stitches all the way around

9) Cut two pieces of ribbon slightly longer than the height of the head. Seal the ends by quickly passing a flame over them.

10) Pin the ribbons on top of the head end pieces.

11) Use embroidery thread and evenly spaces stitches to sew the ribbon on. This will also keep the end caps in place.

Adding the Details

12.jpg
13.jpg
14.jpg
15.jpg
16.jpg
12) Use orange embroidery thread to stitch on the nose. Make three stitches in a triangle pattern.

13) Use red embroidery thread to stitch on the mouth.
Make three increasingly smaller stitches one under the other.

14) Use black embroidery thread to stitch on the eyes. Make each eye out of two slanted stitches close together.

15) Take a 22cm pieces of ribbon, seal the ends. Turn the face over and pin the ribbon to the back, in the centre.

16) Pin the back of the face to the front.


Sew Round the Edge

17.jpg
a.jpg
b.jpg
c.jpg
17) Blanket stitch all the way around.

How to do blanket stitch
a) Pass the needle through the fabric 2-3mm away from the raw edge,
b) Pass the needle through the stitch you've just made, creating a loop.
c) Pull firmly and repeat.


Finishing Touches

front.jpg
back.jpg
tree1.jpg
tree2.jpg
18) When you're about 2cm away from being all the way round lightly stuff, to give the decoration some rigidity, and finish sewing to the end. Tie off and use the needle to take the leftover thread inside the decoration.


That's it! Now make a Katamari Ball Tree Topper to go with it :)

A new instructable every week on www.alittlestranger.com