K'Nex Size Guide Reminder: JOR

This is a guide to help me remember which colors go where in the sizing. Two green rods connected are the same length as one blue rod, and angle well with white rods.

Parts used to make this.

Rods:

• 1 grey
• 2 red
• 2 yellow
• 2 blue
• 2 white
• 2 green

Connectors:

• 1 white
• 4 green
• 1 red
• 1 light-grey

Put the two green rods into the red connector at a right-angle. Put the white, blue, yellow, and red rods into the four green connectors at right angles but do not connect them further yet. Put the two greys together.

Connect the white connector to one of the green rods. Connect the other green rod to the green connector holding the white rods and connect to the white connector. Connect the other white rod to the green connector holding the blue rods and connect to the white connector. Connect the other blue rod to the green connector holding the yellow rods and connect to the white connector. Connect the other yellow rod to the green connector holding the red rods and connect to the white connector.

Add the grey rod to the white connector and connect the grey connector to the red rod. This should complete the assembly.

This helps me remember the sizing. If you have other colors in your collection, this could help you remember which is which. I have about seven colors that are the length of the yellow rod.