K'Nex Cable Car

This is a fun, easy car to build, but it will not climb steep inclines.

Rods: Green-4 White-6 Blue-4 Yellow-6 Red-1

Connectors: Red-2 Yellow-2 White-2 Gray 3D-16

Other: Blue Spacers-6 Tan Clips-2 Metallic Blue Clips-2 Big Tires-2 Yarn-16' Chairs-2 Heavy Objects-2

Take 4 yellow rods & attach them to 2 gray 3D pieces

Take 2 yellow connectors & attach them to 3 white rods each.

Take 4 more sets of 2 gray 3D pieces & attach them to the Base with 4 green rods.

Take 2 yellow rods & attach them to the gray pieces.

Attach the yellow connectors with white rods to the gray pieces.

Put a red connector with two blue rods at the top of both sides of the cable car.

Take 2 big tires, 6 blue spacers, 2 tan clips, 2 metallic blue clips, 1 red rod, 2 white connectors & a green motor.

Take the green motor and attach 2 white connectors, then insert 1 red rod.

Take 4 blue spacers & attach them on either side.

Take the 2 tan clips & attach them next to the blue spacers.

Take the 2 tires & put them on the tan clips.

Take 2 blue spacers & put 1 on each side.

Insert the red rod into the 2 red connectors.

Take the 2 metallic clips & put them on the red rod.

Tie 2 pieces of yarn (8 feet long) to the rungs of 2 chairs, making sure there is sufficient weight on the chairs to keep them from moving together or toppling over.

Place the tire grooves onto the taut yarn.

Enjoy!