K'Nex Blade Runner 'Spinner'

A small project I've been sitting on based off of K's spinner from Blade Runner 2049 (2017), a fantastic film and favourite of mine.

**Tan clips and metallic blue clips are interchangeable with each other**

• 1x 8-way connectors (white)
• 48x 5-way connectors (yellow)
• 11x 4-way connectors (green)
• 18x 3-way connectors (red)
• 2x 7-way 3D connectors (blue)
• 6x 4-way 3D connectors (dark grey)
• 14x 1-way clips w/ hole (purple)
• 13x female hinge clip (black)
• 9x male hinge clip (blue)
• 2x socket clip
• 4x ball clip
• 8x metallic blue clips
• 12x tan interlock clips
• 15x Y-clips (black)
• 8x thick spacers (grey)
• 34x thin spacers (blue)
• 72x 16mm rods (green)
• 64x 32mm rods (white)
• 8x 54mm rods (blue)
• 3x 86mm rods (yellow)
• 6x 86mm flexi-rod (orange)
• 5x 37mm thin wheels
• 5x 37mm thin tires
• 4x 25mm wheel (closed center)
• 2x 25mm wheel (open center)

It is recommended to pre-bend the orange rods to reduce the stress on the connectors.

Last two photos show how the wheel sits in the folded and unfolded positions.