K'NEX Project GM. Emerald - (SMG) (INSTRUCTIONS!!!)

Hello! I'm 8litZ, and this is my first instructables on this account! (My other one is Baxblitrix). This, is the Project GM. Emerald! This is my best build, so I decided to make instructions on it! This is a SMG (Submachine Gun), and it is built exactly how I sketched it out, featuring many different settings and complications added on to the barrel, handles, "holds", and more! Note, this is totally my build, which you are able to build in the instructions I have given you. Features are:

2 Magazines! (ACTUALLY SHOOTS)

2 Handles

Comfortable foregrip

Handle

Rails

Trigger guard

VERY Comfortable

Sightings

Small Stock

Magazine "Clip",

and more!

Well... I guess you'll just have to build it to find out how good it really is, but I will give you a hint. Due to tight complications near the foregrip, bullets have to travel up a ramp to be able to shoot, making them shoot almost directly UP, which you might not like to feel... Otherwise you can remove that and edit a couple things you'll find necessary when experimenting, and show your pictures down in the "whatever" sections. By the way, when shooting, the bullet only pops out 3+ feet. Sorry. Mainly for looks though... (Impressive?) As always, I apologise for any lopsided, blurry, or dark/shadowed,bright pictures.

Maybe we should start with knowing the exact amount of pieces and what and...

Well, here are the supplies. Um, there are 35 kinds of supplies in all. Note that this, (numbers of pieces below) is only a rough estimate.

Connectors:

1-way(Pic 1): 34

2-way(45°)(Pic 2): 30

2-way(180°)(Pic 3): 118

3-way(Pic 4): 73

4-way(Pic 5): 38

5-way(Pic 6): 193

7-way(3D)(Pic 7): 3

8-way(Pic 8): 26

Rods:

16mm(Pic 9): 608

32mm(Pic 10): 147

54mm(Pic 11): 23

86mm(Pic 12): 10

86mm(flexi)(Pic 13): 1

128mm(Pic 14): 7

190mm(Pic 15): 2

Miscellaneous:

Hinge(Pic 16): 7

Hinge part(usually black)(Pic 17): 6

Rod cap(Pic 18): 2

Interlocking clip(Pic 19): 13

Rod-end clip(Y-clip)(Pic 20): 29

Metallic clip(Pic 21): 53

Socket(Pic 22): 8

Ball(Pic 23): 2

Grey spacer(Pic 24): 4

Blue spacer(Pic 25): 30

Clip with angled end 3D(Pic 26): 1

Modified:

Rod-end clip (Y-clip)(Pic 27): 6

2-way(180°)(Pic 28): 7

4-way(Pic 29): 2

5-way(Pic 30): 4

5-way(2)(Pic 31): 3

32mm(Pic 32): ?

Rod(clipped off)(Pic 33): 7

Other:

Spring(Pic 34): 1

Tape(Pic 35)-

Now you have all the pieces...

Difficulty Level:

3/5 - Stars

...Let's start building!!!

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

I am SO SORRY, I literally did a couple mistakes in building this, but I have the solutions. In the end, once having followed all of the pictures, then it would end up completely identical to the front cover and introduction Emerald.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

If you are struggling with anything, please make sure that you have read all image notes and gone over the pictures multiple times. If you are still unable to continue, drop a comment with a picture and description of your issue and I will be more than happy to get back to you. If you further want undivided attention, pm me and describe your problems to me.

Sorry, I forgot to add the rubber bands! :)

Well, that's it, isn't it? Pretty cool. This is only the first of the GM series, which will need plenty of suggestions from you guys and girls. As I said, this thing can barely shoot, as you'll find out in a minute, (If you even bother to test this thing), because it is mainly meant for LOOKS! Please comment, post that you've made it if you have, and favourite it. Honestly, this looks like one of the best K'NEX guns out there. Think it can break 1k views? I'll also give you a hint as to what some of my next projects are going to be! One of them is certainly a break-action shotgun, with as many features as I can just SQUEEZE in, which might include things such as...

I hope you like and have made it,

~(Boss) 8iltZStrxhl~