KDM(Knex Donut Machine)

Hello, Daredevil499 here. this is my first knex instructable. please rate, comment, and subscribe. also please read through the entire instructable.

       This is a thing that spins in circles.

 lets get started

You will need a total of 28 pieces. so here's the list

RODS:
*YELLOW=2
*ORANGE=2
*BLUE=2
*WHITE=3
CONNECTORS:
*WHITE=2
*GREEN=2
*GREY 3D=3
*BLUE 3D=3
*TAN CLIP=1
OTHER:
*GEAR=2(YELLOW OR RED)
*MOTOR=1
*BLUE SPACER=2
*GREY SPACER=1(OR 3 BLUE SPACERS)

YOU CAN GO TO STEP 2

Now get these pieces.

RODS:
*YELLOW=1
*WHITE=2
CONNECTORS:
*BLUE 3D=2
*GREY 3D=2

NOW JUST FOLLOW THE PICTURES.

Now get these pieces

other:
*gears=2
*grey spacer=1
*blue spacer=3
*tan clip=1
CONNECTORS:
*3D CONNECTORS
GRAB STEP 1

NOW JUST FOLLOW THE PICTURES.

Now get these pieces

rods:
*white=1
connectors:
*white=1
other:
*motor=1

NOW JUST FOLLOW THE PICTURES.

THIS IS AN OPTIONAL STEP IT IS NOT NEEDED IT JUST MAKES IT LOOK COOLER.

Now get these pieces

rods:
*yellow=1
*orange=2
connectors:
*green=2

NOW JUST FOLLOW THEE PICTURES.

you just built my machine. to use it just sit the motor up straight and turn it on the gears will spin and it will go in circles
knex pencil holder instructable coming soon.