K'NEX Basic Catapult

Hi! These are the instructions to my catapult. It is an original design and can fire anything! It goes quite far and has an easy fire mechanism. It uses very few parts and is easy to make!

Update:
Hello,
I became pro for two years yesterday, and I have given away 2 of my 40 patches, and I doubt I will ever give them all away without hosting a few contests. The contest is to submit an Instructable (Must have instructions) that is Christmas themed, and send the link to me by private message. The winner will get a specially made patch.
The runners up will be featured in a guide.
The deadline is January 12th 2011.
Thanks,
Flannel UK

What you will need:

Rods:
9 Blue
5 Yellow
4 White
4 Green
1 Red

Connecters:
5 Purple
5 Blue
2 White
4 Red
2 Dark Grey
3 Lighter Grey
4 Orange

Other:
4 Blue Spacers
2 Grey Spacers
2 Tan Clips
2 Same Size Rubber Bands

Parts needed for this step:

8 Blue Rods
6 Blue Connecters
6 Purple Connecters
2 Red Connecters

2 White Connecters
4 White Rods

1 Blue Rod
5 Yellow Rods
4 Dark Grey Connecters
4 Blue Spacers
2 Grey Spacers
4 Orange Connecters
2 Red Connecters
2 Tan Clips

Just squeeze it in!

Slide the two rubber bands through the holes of the red connecters.

4 Green Rods
2 Dark Grey Connecters
1 Red Rod
3 Lighter Grey Connecters

Thanks,
Flannel UK