KEYHOLDER/ JEWELLERY TREE

The Keyholder Jewellery Tree makes storage of keys, Jewellery or other fine stuff easier. It’s also a decoration piece.

- Wooden beam

- 1 Round stick Ø8 x 30cm

- Dremel 3D PLA for the 3d printed parts, in your favorite color.

- Saw (Hand or electric)

- Drill

- Drill bit Ø8

- Wood glue

Saw a fine paste from the wooden beam, about a thickness of 2cm

Drill a hole in the middle of the wooden beam

Paste the stick Ø 8 in the hole of the wooden beam

Assemble all the 3d printed pieces, and cut the wooden stick on the right length

Hang the keys, jewellery, ... in the tree