Just an IDEA

Hello friends, I am also a fellow learner. I am posting this plan about a concept: my refrigerator for Medicine. The problem is many available portable refrigerators are unable to provide adequate temperatures for medicine to be stored or are unnecessarily big, Then this idea came to my mind currently I don't have the proper tools, parts or knowledge to make it properly.

Parts

Peltier Module

Temperature Sensor.  Thermistor   

Type C Jack.           

1.5mm copper sheet as inner material

Aluminium heat sink for backside

Styrofoam for insulation

PVC Sheet for side, up and bottom cover 

Acrylic for the front side

Arduino For Temperature control

[inspiration ]

It is a mini refrigerator but It needs to be big enough to store medicine with, low power usage that can be delivered through any power Bank or mobile charger. So you need to get measurements of the medicine bottle/container which you want to carry or store. You need to change the dimensions of your refrigerator as per your need. I want to store four cartridges of my insulin to be stored that's why 65mm×24mm×24mm inner dimension and 90mm(Hight)×50mm(width)×50mm(depth) outer dimension. For now, it can't be completed due to a lack of Parts, Tools and knowledge. If any of you readers have these and want to try it please go on . for now hats off.