Jumping Spider for Halloween
by davidsuffern in Living > Halloween
341 Views, 2 Favorites, 0 Comments
Jumping Spider for Halloween
![Photo on 10-7-23 at 8.16 PM.jpg](/proxy/?url=https://content.instructables.com/FQ5/Y4X0/LNG1PKCW/FQ5Y4X0LNG1PKCW.jpg&filename=Photo on 10-7-23 at 8.16 PM.jpg)
![Photo on 10-7-23 at 8.16 PM #2.jpg](/proxy/?url=https://content.instructables.com/FUF/TAVP/LNG1PKCX/FUFTAVPLNG1PKCX.jpg&filename=Photo on 10-7-23 at 8.16 PM #2.jpg)
![Photo on 10-7-23 at 8.17 PM.jpg](/proxy/?url=https://content.instructables.com/FZ5/D9B7/LNG1PKCY/FZ5D9B7LNG1PKCY.jpg&filename=Photo on 10-7-23 at 8.17 PM.jpg)
I have never made anything out of Legos for Halloween before. This was my first time making anything for a holiday. This build is a Halloween spider that can descend from a pulley wheel hanged on a tree. (In my case)
Supplies
1x pf battery box
2x small pf motors
4x large technic gears
2x small technic gears
2x 13 stud long technic liftarms
2x 15 stud long liftarms
7x 3 stud long axle connectors
4x 3 stud long liftarm connectors
7x two stud long liftarm connectors
2x 5 x 7 square technic parts
1x 1 x 1 technic spacer
1x axle bushing
2x 3 x 7 bent liftarms
5x friction pin to axle connector
2x non-friction pin to axle connector
1x 3 stud long axle
1x 4 stud long axle
2x 7 stud long axle
2x 1 x 3 technic liftarms with rotated pin holes
2x 4 x 2 L-shaped technic liftarms
1x 5 x 3 L-shaped technic liftarm
2x medium standard gears
1x 2 stud long techic spacer
1x pf switch
Build Half of Mechanism
![Photo on 10-7-23 at 8.18 PM.jpg](/proxy/?url=https://content.instructables.com/FCQ/80UC/LNG1PLBT/FCQ80UCLNG1PLBT.jpg&filename=Photo on 10-7-23 at 8.18 PM.jpg)
![Photo on 10-7-23 at 8.18 PM #2.jpg](/proxy/?url=https://content.instructables.com/F1E/ZNZV/LNG1PLBU/F1EZNZVLNG1PLBU.jpg&filename=Photo on 10-7-23 at 8.18 PM #2.jpg)
make this half...
Build Other Half
![Photo on 10-7-23 at 8.19 PM.jpg](/proxy/?url=https://content.instructables.com/FFW/3N86/LNG1PLDH/FFW3N86LNG1PLDH.jpg&filename=Photo on 10-7-23 at 8.19 PM.jpg)
build the other half...
Build Battery Box Holder
![Photo on 10-7-23 at 8.19 PM #2.jpg](/proxy/?url=https://content.instructables.com/FL2/OH3I/LNG1PLGH/FL2OH3ILNG1PLGH.jpg&filename=Photo on 10-7-23 at 8.19 PM #2.jpg)
this is the battery holder...
Switch
![Photo on 10-7-23 at 8.18 PM #3.jpg](/proxy/?url=https://content.instructables.com/FS1/YPYM/LNG1PLIP/FS1YPYMLNG1PLIP.jpg&filename=Photo on 10-7-23 at 8.18 PM #3.jpg)
build the switch... (parts not on parts list)
Put It Together
![Photo on 10-7-23 at 8.20 PM #2.jpg](/proxy/?url=https://content.instructables.com/FUU/36MW/LNG1PLNT/FUU36MWLNG1PLNT.jpg&filename=Photo on 10-7-23 at 8.20 PM #2.jpg)
![Photo on 10-7-23 at 8.20 PM #3.jpg](/proxy/?url=https://content.instructables.com/F2X/64EU/LNG1PLNU/F2X64EULNG1PLNU.jpg&filename=Photo on 10-7-23 at 8.20 PM #3.jpg)
now! put it together
Your Done!
![Photo on 10-7-23 at 8.16 PM.jpg](/proxy/?url=https://content.instructables.com/FCV/J7NI/LNG1PLRL/FCVJ7NILNG1PLRL.jpg&filename=Photo on 10-7-23 at 8.16 PM.jpg)
now attach your furry friend and your done! Happy Halloween!