Jewelry Box | Laser Cut | Gift

by alexphipps696 in Workshop > Laser Cutting

18 Views, 0 Favorites, 0 Comments

Jewelry Box | Laser Cut | Gift

Work (2).png

In this blog, you can try to make a Jewelry Box with drawer. It's comprised of 3 mm plywood. If you have a laser cutter, you can try make one.

Supplies

MATERIALS:

  1. 3mm thickness plywood (65*45cm),
  2. Glue,

EQUIPMENT:

  1. 20W NEJE Laser Cutter(700*460mm)
  2. Software: Light burn

Upload the File

File.png
How to cut a jewellery box with drawers with NEJE Laser Cutter!

You will need to cut and engrave(Fill) with this file. I use light-burn as my laser working software. If you want this project to be larger, you can expand its area and choose to cut only one or two at a time.

Laser Cutting

Pieces.png
Cutting.png

Your machine should be large enough for laser engrave and cut a 65*45cm plywood sheet. Otherwise, you may need to adjust your file. I used NEJE MAX 4 v2(700*460mm). Once you adjust your settings, you can start cutting.

Assembly

Together.png
Together1.png

Arrange them in order and fix them with glue.

Enjoy Your Work

Work (1).png
Work (2).png