Jellyfish Pendent

I made this for a friend and she loved it so let me share with the rest of you. Sorry there are not a lot of pictures. I always dive head first and then after the fact think of taking pictures . Plus what else would you do with those old forks you have lying around haha. Mine I found in my back yard while putting in a new fence. 

Files
Saw ( I used a jewelers saw)
Blow torch 
Pliers
Safety equipment (gloves, goggles,)
Dremel or a flex shaft (optional but helps file it down faster)
Sandpaper various grits 
polishing wheel and some polishing compound  

Put on some heat resistant gloves and fire up the blow torch. Get the prongs nice and hot. You may want to do them one at a time because they will cool off to fast. Now bend and twist the prongs into the shape of your tentacles.  

Now take your saw and saw off the head as close as you can towards the rounded part.

Now file the little left from sawing it off. Now you will more than likely need a little sanding and a good buffing because of using the blow torch has left it a little blackened. Once that is done just drill a hole in the body or solder on a jump ring and there you go.