Jeans Wallet

Take an old pair of jeans and transform it into a neat ID or credit card holder!

Materials Needed:

Jeans/Shorts
Needle
Thread
Sharpie
ID or Credit card

Find your jeans and lay an ID or credit card on top of the section of material you want to use.

Trace the perimeter about a quarter inch away from the card, trace the top and both sides.

Next move your card down and trace again, completing the border.

NOTE: You must trace double the width of the card since you will be folding your material in half to sew it.

After you have created the template, proceed to cut it out with scissors. WATCH YOUR FINGERS.

If you dont know how to sew, visit this site before proceeding.

Fold your material in half putting the good part on the inside of the fold, you will be inverting it at the end of this step.

Put ID on folded material and trace a line around the id again close to the edge of the material. This is going to be your guide, sew along this line.

After sewing along the sides (LEAVE ONE END OPEN), you are going to turn this inside out.

Thats it! You've just made a small pocket to keep your things in.

For those who are sew savvy, you can add a flap and a button to secure your cards.