James Develin Recovery Center and Gym
by Elijahs44 in Craft > Digital Graphics
345 Views, 1 Favorites, 0 Comments
James Develin Recovery Center and Gym
![Screenshot 2021-01-29 at 08.16.37.png](/proxy/?url=https://content.instructables.com/FRJ/WBDH/KKIAP949/FRJWBDHKKIAP949.png&filename=Screenshot 2021-01-29 at 08.16.37.png)
![Screenshot 2021-01-29 at 08.33.27.png](/proxy/?url=https://content.instructables.com/F3X/DMB1/KKIAP9A4/F3XDMB1KKIAP9A4.png&filename=Screenshot 2021-01-29 at 08.33.27.png)
This is our finished Gym (Minus the roof) we considered what you wanted it to be compatible for and tried to meet that the best we could. Including a Physical therapy room, sanitizing stations, and making sure to keep social distancing possible. It also includes a recovery running area to the right and bathrooms. it is also tile throughout for easy cleaning.
Making the Floorplan
![Screenshot 2021-01-08 at 11.25.10.png](/proxy/?url=https://content.instructables.com/FOY/YNGA/KKIAP9AJ/FOYYNGAKKIAP9AJ.png&filename=Screenshot 2021-01-08 at 11.25.10.png)
We started out making the basic floor plan on paper then building it on Tinker-cad making a few changes along the way.
Making the Equipment
![Screenshot 2021-01-29 at 14.38.30.png](/proxy/?url=https://content.instructables.com/FJI/W5KI/KKIGD0NV/FJIW5KIKKIGD0NV.png&filename=Screenshot 2021-01-29 at 14.38.30.png)
After that we started to build the inside of the gym and build the equipment
Adding on
![Screenshot 2021-01-29 at 08.33.27.png](/proxy/?url=https://content.instructables.com/F14/XJJ4/KKIGD0S4/F14XJJ4KKIGD0S4.png&filename=Screenshot 2021-01-29 at 08.33.27.png)
![Screenshot 2021-01-29 at 2.36.26 PM.png](/proxy/?url=https://content.instructables.com/FVB/DLDP/KKIGD0VJ/FVBDLDPKKIGD0VJ.png&filename=Screenshot 2021-01-29 at 2.36.26 PM.png)
![Screenshot 2021-01-29 at 2.35.19 PM (1).png](/proxy/?url=https://content.instructables.com/FGB/LANX/KKIGD0VH/FGBLANXKKIGD0VH.png&filename=Screenshot 2021-01-29 at 2.35.19 PM (1).png)
We then added the physical therapy room and bathrooms to basically finish it off
The Finished Product
![Screenshot 2021-01-29 at 2.53.23 PM.png](/proxy/?url=https://content.instructables.com/F47/YDA7/KKIGD0X1/F47YDA7KKIGD0X1.png&filename=Screenshot 2021-01-29 at 2.53.23 PM.png)
![Screenshot 2021-01-29 at 2.52.15 PM.png](/proxy/?url=https://content.instructables.com/F1K/RHM7/KKIGD0X2/F1KRHM7KKIGD0X2.png&filename=Screenshot 2021-01-29 at 2.52.15 PM.png)
![Screenshot 2021-01-29 at 2.51.50 PM.png](/proxy/?url=https://content.instructables.com/FF4/TMHU/KKIGD0X3/FF4TMHUKKIGD0X3.png&filename=Screenshot 2021-01-29 at 2.51.50 PM.png)
These are a close up of the finished product.