JEWELRY CLEANING DEVICE

● Three AA batteries

● DC motor for radio-controlled models "Sodfunt Co" 3-6V (L20mm)(or others)

● Any soldering iron

● Bottle with a volume of 0.5 liters

● The body that is

● Six screws

● Gearbox for radio-controlled models

● Remote control from the toy

● Installation wire 30AWG 0.25mm

● You will still need sand, and better slag

First you need to cut the bottle. Then screw in the self-tapping screws.

We connect everything in series. Battery compartment with ENGINE. Then the engine with the gearbox.

From the gearbox we let's put an axis with a white gear at the end. Which is connected to the larger yellow one.