Iron Man Pocket Buddy
![100_0839.JPG](/proxy/?url=https://content.instructables.com/FXA/7FTC/IL25Z6SW/FXA7FTCIL25Z6SW.jpg&filename=100_0839.JPG)
![100_0840.JPG](/proxy/?url=https://content.instructables.com/F1N/5YP9/IL25Z6SU/F1N5YP9IL25Z6SU.jpg&filename=100_0840.JPG)
I was given the assignment in my Mechanical Drawing class to create a pocket buddy. My classmates and I got together and decided to create the Avengers, inspired by Marvel. My character that I chose from the Avengers was Iron Man.
![Iron Man pic1.PNG](/proxy/?url=https://content.instructables.com/FIF/SE4P/IK7BM2A5/FIFSE4PIK7BM2A5.png&filename=Iron Man pic1.PNG)
I used pictures of Iron Man from the Marvel movies to inspire my drawing in Auto CAD. I made the piece three layers so that the eyes and heart could be indented. I drew the detail for the heart on the middle piece so that it would stand out. When I finished I added a key chain element to the design so that I could put it on the key ring with my car keys.
Downloads
![Iron man front.jpg](/proxy/?url=https://content.instructables.com/F9R/8QQS/IL25Z772/F9R8QQSIL25Z772.jpg&filename=Iron man front.jpg)
![Iron man back.jpg](/proxy/?url=https://content.instructables.com/F3T/5TXW/IL25Z77A/F3T5TXWIL25Z77A.jpg&filename=Iron man back.jpg)
I printed my design on the laser printer three pieces of wood thick. To make the eyes darker I made a rectangle behind the eyes on the middle piece. I set the speed of the laser for that rectangle so that it would only darken the wood and not cut all the way through. After I glued the three pieces together in order of their design and then sanded the piece. After sanding I sprayed the piece with a clear coat of paint to preserve the wood.