Iron Man Pen Holder | Laser Cut | Desktop

In this blog, you can try to make a Iron Man Pen Holder. It's made of just plywood. If you have a laser cutter and like this figure, try making one :)

MATERIALS:

1. 3mm thickness plywood (30*40cm),
2. Red, Yellow, Brown and Blue spray or Acrylic marker
3. Wood glue

EQUIPMENT:

1. 20W NEJE Laser Cutter
2. Software: Lightburn

You will only need to cut with this file. As usual, I use light-burn as my laser working software. You can also use laser-grbl or other software you like to create laser crafts.

Your machine should be large enough for laser engrave and cut a 40*30cm plywood sheet. Otherwise, you may need to adjust your file or cut them one by one. But since it is just a wall decoration, the size depends on your own preference.

You can also choose to color with acrylic markers. These two methods are more suitable for coloring wood and can greatly cover the wood grain of the plywood itself.