Inventor Sweeping

by JeremyBraithwaite in Teachers > Engineering

2901 Views, 3 Favorites, 0 Comments

Inventor Sweeping

During this tutorial, you will gain experience using Extrude, Sweep, Revolve, Hole, Chamfer and Fillet Features. You will also share sketches and work with 2D Constraints. Be sure to only use the Dimensions provided.

Create the First 2D Sketch

Create the Extrude Feature As Shown

Create a New 2D Sketch on an Origin Plane That Is Perpendicular to the Base 2D Sketch

Create the New 2D Sketch As Shown

Turn on Sketch1 Visibility

Create the Sweep Feature As Shown

Turn on Sketch2 Visibility

Create the Revolve Feature As Shown

Apply the Chamfer Feature As Shown

Create the Hole Feature As Shown

Create the Circular Pattern As Shown

Apply the Fillet Features As Shown

Change Appearances As Desired - You're Finished!