Interwoven Overhand Knots - ABOK 806
1441 Views, 2 Favorites, 0 Comments
Interwoven Overhand Knots - ABOK 806
![P1010003 (12).JPG](/proxy/?url=https://content.instructables.com/FMD/NSR4/KCDDIUKD/FMDNSR4KCDDIUKD.jpg&filename=P1010003 (12).JPG)
Ashley calls this knot a "very symmetrical flat lanyard knot"
Decorative loop knot suitable for lanyard, zipper pull, key ring fob, etc.
First Overhand Knot
![P1010004 (12).JPG](/proxy/?url=https://content.instructables.com/FF5/NZUP/KCDDIT1V/FF5NZUPKCDDIT1V.jpg&filename=P1010004 (12).JPG)
![P1010005 (11).JPG](/proxy/?url=https://content.instructables.com/F3P/NK7U/KCDDITLF/F3PNK7UKCDDITLF.jpg&filename=P1010005 (11).JPG)
Take one end of cord and bring it under, over and down through the bight.
Begin the Second Overhand Knot
![P1010018 (2).JPG](/proxy/?url=https://content.instructables.com/FEF/T8DB/KCDDITEC/FEFT8DBKCDDITEC.jpg&filename=P1010018 (2).JPG)
The other end is now the Working End (WE).
Take the WE and bring it under two, over one.
![P1010019 (1).JPG](/proxy/?url=https://content.instructables.com/F0Q/GG8U/KCDDITFF/F0QGG8UKCDDITFF.jpg&filename=P1010019 (1).JPG)
Pull WE down to set size of loop of your project.
![P1010006 (11).JPG](/proxy/?url=https://content.instructables.com/F44/5421/KCDDIT2Z/F445421KCDDIT2Z.jpg&filename=P1010006 (11).JPG)
Bring WE from right to left going under, over, under, over, under.
![P1010007 (11).JPG](/proxy/?url=https://content.instructables.com/F4G/N2TH/KCDDIT43/F4GN2THKCDDIT43.jpg&filename=P1010007 (11).JPG)
Pull WE until small bight is formed on lower left.
![P1010008 (10).JPG](/proxy/?url=https://content.instructables.com/FIU/SGOD/KCDDIT7H/FIUSGODKCDDIT7H.jpg&filename=P1010008 (10).JPG)
Bring WE over and (from right to left) go over one, under three and up through the bight.
![P1010009 (8).JPG](/proxy/?url=https://content.instructables.com/F5E/BB8K/KCDDIT7K/F5EBB8KKCDDIT7K.jpg&filename=P1010009 (8).JPG)
Pull WE to form upper right bight. This completes the second overhand knot.
Begin to Tighten
![P1010010 (8).JPG](/proxy/?url=https://content.instructables.com/F4M/7S3W/KCDDIT8N/F4M7S3WKCDDIT8N.jpg&filename=P1010010 (8).JPG)
Pull on left side of loop to take slack out of lower right bight.
![P1010011 (7).JPG](/proxy/?url=https://content.instructables.com/FN5/VBOD/KCDDIT9U/FN5VBODKCDDIT9U.jpg&filename=P1010011 (7).JPG)
Pull on right side of loop to take slack out of lower left bight.
![P1010012 (6).JPG](/proxy/?url=https://content.instructables.com/FZ3/1B8K/KCDDITC0/FZ31B8KKCDDITC0.jpg&filename=P1010012 (6).JPG)
Pull on right hand end.
![P1010013 (5).JPG](/proxy/?url=https://content.instructables.com/F0O/YMAS/KCDDITC6/F0OYMASKCDDITC6.jpg&filename=P1010013 (5).JPG)
Pull on left hand end.
![P1010014 (2).JPG](/proxy/?url=https://content.instructables.com/F30/2DUZ/KCDDIWTH/F302DUZKCDDIWTH.jpg&filename=P1010014 (2).JPG)
Repeat steps 8-11 until knot is tightened. A little slack still remains in lower left bight.