Interwoven Figure-8-knots Loop
![P1010001 (11).JPG](/proxy/?url=https://content.instructables.com/F6S/S998/KBJDAD6L/F6SS998KBJDAD6L.jpg&filename=P1010001 (11).JPG)
This is a step-by-step instructions for ABOK 805
Depending on the clip used this loop can be used as a lanyard, zipper pull, key ring fob, etc.
![P1010002 (10).JPG](/proxy/?url=https://content.instructables.com/FJR/K1FW/KBJDACMG/FJRK1FWKBJDACMG.jpg&filename=P1010002 (10).JPG)
![P1010004 (8).JPG](/proxy/?url=https://content.instructables.com/F09/1WOB/KBJDACN5/F091WOBKBJDACN5.jpg&filename=P1010004 (8).JPG)
Bring Working End under standing part.
![P1010005 (7).JPG](/proxy/?url=https://content.instructables.com/FEJ/I84Z/KBJDACN7/FEJI84ZKBJDACN7.jpg&filename=P1010005 (7).JPG)
![P1010006 (7).JPG](/proxy/?url=https://content.instructables.com/FNL/A099/KBJDACN9/FNLA099KBJDACN9.jpg&filename=P1010006 (7).JPG)
Bring WE back over standing part and up through the bight. This forms the first figure-8-knot.
![P1010007 (7).JPG](/proxy/?url=https://content.instructables.com/FNM/V0IK/KBJDACND/FNMV0IKKBJDACND.jpg&filename=P1010007 (7).JPG)
Turn knot so that standing part is on the left. The Standing End becomes the new WE.
![P1010008 (6).JPG](/proxy/?url=https://content.instructables.com/FZZ/09AK/KBJDACQP/FZZ09AKKBJDACQP.jpg&filename=P1010008 (6).JPG)
Bring new WE through the figure 8 parallel to the old WE. This forms the loop of your knot.
![P1010009 (4).JPG](/proxy/?url=https://content.instructables.com/FXU/4085/KBJDACQR/FXU4085KBJDACQR.jpg&filename=P1010009 (4).JPG)
Bring WE to the left down through the bight and under the side of the loop.
![P1010011 (3).JPG](/proxy/?url=https://content.instructables.com/F0B/Z30N/KBJDACRJ/F0BZ30NKBJDACRJ.jpg&filename=P1010011 (3).JPG)
![P1010012 (2).JPG](/proxy/?url=https://content.instructables.com/FNL/50TT/KBJDACS8/FNL50TTKBJDACS8.jpg&filename=P1010012 (2).JPG)
Bring WE down through the bight. This completes the second figure-8-knot. Tighten.