Interfacing of Led With STM32F1 (ARM CORTEX) Microcontroller
by embeddedbymedhavi in Circuits > Microcontrollers
8 Views, 0 Favorites, 0 Comments
Interfacing of Led With STM32F1 (ARM CORTEX) Microcontroller
Introduction of STM32F1:
The STM32F103xx medium-density performance line family incorporates the high-performance ARM Cortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
FEATURES of STM32F1
Component Used:
1) STM32F103 Board
2) LED
Software Used:
1) KEIL u Vision 4:
2) STM32CubeMX:
Pin Diagram OF STM32F103
Mode of STM32F1
1) Operating Mode
2) Programming Mode
How to Burn Code in STM32F1 Using Seial to USB
How to Work on STM32F1 Microcontroller Using CubeMX and Keil
Code of STM32F1 With Led
Hardware Implementation of STM32F1 With Led
Any Query related Embedded System , IOT and Raspberry PI go to
You Tube Channel:
My Blog: