Install a Backup Camera

How to install a Peak backup camera.

Today I'll show you how to install a backup camera on your vehicle.

Your Need:
1 Peak Backup Camera

Tools:
1 flat blade screw driver
2 Philips screw driver
3 pair of pliers

This brand of camera is wireless and fastens to the license plate.
Take the license plate screws and use the to screw the camera on.

I ran the wires up under the bumper to the drivers side. I put the wire under the carpet.

Remove your taillight.

I had to open up the panelling to send the wires into the back of the taillight.

Connect your wires to the back up light. Make sure your polarity is correct. On this one the green wire was positive and the black was negative.

Put your taillight back in and zip tie the wires securely.

I'm sorry I don't have a video of it working but I don't know how to put a video on instructables.