Insanely Small USS Enterprise

by Mastermind202 in Living > LEGO & K'NEX

740 Views, 8 Favorites, 0 Comments

Insanely Small USS Enterprise

DSCF3639.JPG

I am not a Star Trek fan but, come on, who doesn't know what the Enterprise is?

I typically like to make micro Lego sets because they're detailed, portable, and use very little pieces (I still don't have enough).

Happy Thanksgiving!

Update: Is this the smallest out there? Whoa!

Parts

DSCF3645.JPG
  • 1: 2 x 2 satellite dish
  • 1: 1 x 1 binoculars
  • 1: 1 x 1 brick with a stud on an indented side
  • 1: "light saber" blade with 3 studs - one on the bottom and two on the top facing outward

Build

DSCF3635.JPG
DSCF3636.JPG
DSCF3637.JPG
DSCF3638.JPG

  1. Arrange the 1 x 1 brick w/ stud on side so that the side stud is facing upward.
  2. Place the binoculars on the side stud. The large end should point outward.
  3. Stick the side of the "light saber" that only has one stud into the side of the brick that is an open hole. Make sure the other studs are pointing in an up/down orientation.
  4. Place the 2 x 2 satellite dish on the top of the "light saber."

Bonus Display Stand!

DSCF3652.JPG
DSCF3646.JPG
DSCF3647.JPG
DSCF3649.JPG
DSCF3650.JPG

Parts:

  • 2: 1 x 1 clear studs
  • 1: 2 x 3 plate with a hole at a skinny end

Directions:

  1. Place a 1 x 1 stud on top of the plate. It should stick IN BETWEEN the four studs.
  2. Place another stud on top of the first.
  3. Stick the Enterprise on the stand. it should have a hole in the bottom.

Finished!

DSCF3651.JPG
DSCF3642.JPG
DSCF3641.JPG
DSCF3640.JPG
DSCF3643.JPG

Enjoy! It's either a tiny model or an ultra-portable toy!

Just don't loose it!