Illuminated Glass Gift Decoration

This illuminated glass gift decoration is a simple and affordable project to make. I bought the materials at a dollar store so it only cost about $5 to make each one! I made several and gave them as Christmas presents. They're so pretty that I kept a few for myself as well! Just follow the steps in my instructable and you will surely light up any room with this beautiful decoration!

You will need:

• Double-sided tape (I used carpet tape that I had on hand)
• A square mirror (5"x 5")
• Battery-operated LED lights
• 4.5' of decorative ribbon with wire edge
• A 3"x 3" or 4"x 4" square glass
• Low-temp mini glue gun and glue sticks
• 2 AA batteries

Adhere double-sided tape (cut to fit) to the side of the battery compartment that the batteries go in; not the removable slide-off door of the compartment. Remove the tape backing and secure the battery compartment (with on/off switch near the edge) centered at one side of the mirror. Optional: secure battery pack using hot glue.

Wrap the ribbon (in gift-box fashion) around the square glass box and make a bow. The ribbon will criss-cross over the open-end of the glass and the bow will be on the opposite end. Feed the lights, one-by-one, through one opening made by the ribbon in the bottom of the glass box.

Run a bead of hot glue along the bottom edge of the glass box leaving a small space for the wire of the light set. Turn the glass box over and carefully center it onto the mirror. Tuck any excess wire into the glass box. Run another bead of hot glue along the edges where the glass box meets the mirror leaving a small space where the wire protrudes.