IPhone Amplifier Made of Cheap Materials

by ornevo in Circuits > Apple

3391 Views, 28 Favorites, 0 Comments

IPhone Amplifier Made of Cheap Materials

IMG_2047.jpg
You want to increase the volume of iPhone music? Do not want to buy expensive speakers? You are on a camping trip or in the office and want to listen to music?
Here you will find the answer!

Step One

�������������� ���� IMG_2038.jpg
What materials are needed?
IPhone
Knife
2 cups Styrofoam / plastic / paper
Plastic bottle / can
Insulating tape

Step Two

IMG_2034.jpg
IMG_2036.jpg
IMG_2035.jpg
Take the cups and with the knife cut the bottoms out

Step Three

IMG_2039.jpg
Cut the plastic bottle into 3 parts.
We will use the middle part that look like a tube.

Step Four

IMG_2041.jpg
IMG_2040.jpg
We will take the middle part of the bottle (the tube) and by using a knife we shall cut a thin slot just in the dimensions of the iPhone.
The slot shall measure approximately 1.5X6 centimeters

Step Five

IMG_2042.jpg
IMG_2043.jpg
IMG_2045.jpg
At last - we neet to connect the cups (Those without bottom) to part of the bottle (that we cut).
The parts will be attached with insulating tape.

The End

IMG_2046.jpg
IMG_2047.jpg
We will put the iPhone with the speaker side (bottom side) into the opening in the facility.
We activate the music - and what's left is to enjoy :)