IPhone Unlock+Gevey
OK guys and girls, have problem with your iPhone? A locked one? An unlocked one gets locked again? No service? "No SIM Card Installed" message although you did put it? Can't try on the dumb no good dirty rotten instructions?Here, an easy one. THIS WILL BE HELPFUL FOR THE ONES WHO OWN THAT GEVEY CARD BEFORE, AND NEED RE-UNLOCKING THE LOCKED ONE. YOU MIGHT POWER OFF BY ACCIDENT, BATTERY IS GONE OR WHATEVER YO DID, THIS WILL BE HELPFUL ANYWAY. Here we go...........
You Might(Must) Need........
1. Gevey SIM adapter, get at www.gevey.com , or get from a store and buy it, don't waste money by letting them do it. If you already have that one, go on guys and girls, speed up!
2. Apple Ballpoint Pen (that doesn't meant that from Apple California, but it is a pen from China with the same name). This is optional, but you can use other.
3. Pliers and a sharp knife.
4. Patient Mind, reading all my instructions CAREFULLY BEFORE DOING IT.
5. And the last, but not the least, quick hands!
You Might(Must) Need........
1. Gevey SIM adapter, get at www.gevey.com , or get from a store and buy it, don't waste money by letting them do it. If you already have that one, go on guys and girls, speed up!
2. Apple Ballpoint Pen (that doesn't meant that from Apple California, but it is a pen from China with the same name). This is optional, but you can use other.
3. Pliers and a sharp knife.
4. Patient Mind, reading all my instructions CAREFULLY BEFORE DOING IT.
5. And the last, but not the least, quick hands!
Let's Get Prepaired....
OK, take out that SIM in you phone.....
Gevey??? What's Up?
OK, we are going to learn about Gevey. It acts out like a mid point between the SIM and the Phone. Let's go..........
The Most Dangerous Part Ever After and Before........
OK, free your mind, concentrate on a chair and put your stuff on the table, with your pliers and knife prepaired. Carefully, cut off the part shown in the picture by firstly using a knife and make a deep cut. Then take off by using your pliers. Becareful not to break the chip. This is not my fault if you break it. Whatever, you can also use your own method.
Assemble...
Let's assemble. If you can't put it in, try to use a file to make the cut area larger, enough to fit the IC. Easiest Step Though ;)
Shut Down Man.... I Must Prepair to End Up the Errors....
Follow the instructions in the picture, be patient...
Lightning Fingers, Lightning Reflex.....
OK, OK.... Now follow the steps and remarks on the pictures carefully again... Lightning Fingers!