IPhone Cloth Case

by rodski in Circuits > Mobile

1100 Views, 5 Favorites, 0 Comments

IPhone Cloth Case

14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
14, 8:49 PM.jpg
An iPhone case using Cloth instead of leather.A project that's cheap on budget whick cost me only P10.00 for the cloth.,+ P100 for the rubber bumper.Very easy to make.I used Rubber Bumper for added protection.,that will protect the iphone everytime i slide it into the metal clamp,.Refer to the image how i made it.,which is very light on budget,.Cloth used is a water splash resistant only.

Mobile Clamp

14, 8:49 PM.jpg
Cut a flat iron sheet at least 1cm width & length varies on iphone models thickness.

Mobile Clamp

14, 8:49 PM.jpg
2 pcs mobile clamp made of metal,use for attaching iphone on case.Make sure it's well sanded for smooth iphone sliding in.

14, 8:49 PM.jpg
properly align the iphone with the 2 pcs iron clamp & Glue the 2 pcs iron clamp in cardboard.

14, 8:49 PM.jpg
14, 8:49 PM.jpg
Make a cloth pattern for dressing the top of the cardboard

14, 8:49 PM.jpg
14, 8:49 PM.jpg
Finally make another pattern to dress up the inner part of the cardboard.

14, 8:49 PM.jpg
Attached a velcro tape onto strap for locking the iphone case

Final Result

14, 8:49 PM.jpg
This is how it will look like when iphone is attached on cloth case.