IJDMTOY 2007-2016 Jeep Wrangler 20" Light Bar Bracket Install

When most people think about off-road vehicles, they immediately think of Jeep. The Jeep Wrangler is known for its off-roading capabilities and it iconic look. Many people want to add lights when adventuring through the night and this is why we have created this iJDMTOY Jeep Wrangler LED Light Bar. This installation guide will show you how to install the metal bracket on to the Jeep.

First, determine whether you want your LED light bar to be either on the bottom of the grill or the top.

It is not necessary to take off the grill but taking it off will make the installation much easier. Unclip the plastic cover to expose the holes.

Get the metal brackets and use the larger holes bolt it to the frame where the plastic piece used to clip on. Make sure that the bend is towards the center. Use the larger holes to screw everything in place.

Put the plastic cover back to where it was and clip it to the new holes on the bracket you just installed. Now you’re ready to put on your LED’s.

This Installation was very simple and you’ll be out enjoying your new iJDMTOY Jeep Wrangler LED Light Bar in no time. This will make going on night adventures safer and give you a greater visibility in front of you.