ID Badge Lanyard by LANMANParacord
by nludvigson in Outside > Paracord
1178 Views, 7 Favorites, 0 Comments
ID Badge Lanyard by LANMANParacord
Horizontal or Vertical ID Badge w/ Lanyard
http://www.lanmanparacord.com//product_info.php/products_id/271
Materials you'll need:
About 4' of paracord
(1) 1/2" plastic buckle
Break away cord release of some kind
An ID badge sleeve
The loop that goes through the plastic sleeve must be about 2" so you can make a cow's hitch. Form the loop and tie a cobra weave attached to one end of the buckle. Thanks the hard part. Now do a cow's hitch on the other side of the buckle leaving enough length to go over the average sized head. I left about 14". Slip the open ends through the cord release and burn the ends so it won't slip off the ends. Snap together the cord release ends and you're done!
http://www.lanmanparacord.com//product_info.php/products_id/271
Materials you'll need:
About 4' of paracord
(1) 1/2" plastic buckle
Break away cord release of some kind
An ID badge sleeve
The loop that goes through the plastic sleeve must be about 2" so you can make a cow's hitch. Form the loop and tie a cobra weave attached to one end of the buckle. Thanks the hard part. Now do a cow's hitch on the other side of the buckle leaving enough length to go over the average sized head. I left about 14". Slip the open ends through the cord release and burn the ends so it won't slip off the ends. Snap together the cord release ends and you're done!