ICT Proyect Homemade Dice by Andres Arze Alejandro Plaza and Andres Antelo

How to make a homemade dice.

Tinkercad

Paper

Scissors

Ruler

Markers

3D printer (opcional but for a

First go into tinkercard and start by selecting a cube.

continue by changing the size from 20 to 75 on width and height.

Continue by giving the cube a radio of 1 or a little bit more.

continue by changing the color of the cube to a white.

Next use the Work Plan and put it on one side of the cube

Now change your view until it looks like on the picture

Continue by selecting a sphere and put it somewhere in the middle

Change the sphere color to black

The spheres height put it on -13 so it looks merged on the Cube and repeat this process until it looks like a normal cube

Get a white paper and draw a 20cm horizontal line and a 5 cm vertical line.

make a mark on the first 5 cm 10 and 15 in the horzontal line

Make another vertical line on the right and make the close it so it makes a rectangle.

Make a Straight vertical line in the points you marked before

In the 5cm mark and the 10cm mark add up 5 cm up and 5cm down and close it with a horizontal line like this

Make some lines around the boxes like this

Start making the Numbers for the dice like this and in this order.

Cut it with some scissors carefully like this.

In the lines you have on the shape start bending them in the shape carefully and it will start to get a cube shape like this

Start by putting glue on the outsanding pieces

Paste all the outsanding pieces together until it end like this.

Once done just color the numbers with a black marker and you are doneeee.