I Made a Stressball and a Tag That Goes Inside the Stress Ball.
by jordanmaas924 in Craft > Art
89 Views, 0 Favorites, 0 Comments
I Made a Stressball and a Tag That Goes Inside the Stress Ball.
![image4.jpeg](/proxy/?url=https://content.instructables.com/FER/O7H0/LB3YJXHL/FERO7H0LB3YJXHL.jpg&filename=image4.jpeg)
I made this tag and It will go into a clear balloon so my client can see what the message says. She struggles with anxiety so this will help her in a situation when she's struggling. And the message will be visible at all times for her to look down at.
Downloads
Supplies
![image1.jpeg](/proxy/?url=https://content.instructables.com/F9H/0O84/LB3YJXDM/F9H0O84LB3YJXDM.jpg&filename=image1.jpeg)
I used a clear balloon, flour, a funnel, and a straw.
Funneling the Flour Into the Balloon
![image2.jpeg](/proxy/?url=https://content.instructables.com/F88/XI5X/LB3YJXEY/F88XI5XLB3YJXEY.jpg&filename=image2.jpeg)
![image3.jpeg](/proxy/?url=https://content.instructables.com/FMH/BZE0/LB3YJXF7/FMHBZE0LB3YJXF7.jpg&filename=image3.jpeg)
I poured flour into the funnel and since the hole was pretty small for the flour to flow into the balloon I had to use a straw for help.
Finishing Touches
![image4.jpeg](/proxy/?url=https://content.instructables.com/FMB/MPOB/LB3YJXFN/FMBMPOBLB3YJXFN.jpg&filename=image4.jpeg)
Once I finished I just tied the balloon up but for my next prototype, I will need to add my tag into the balloon and after that it will all be finished.