Hydroponics Tower, Grow Food at Home

by ozzb in Living > Gardening

169 Views, 0 Favorites, 0 Comments

Hydroponics Tower, Grow Food at Home

tinkercad main part.png
tinkercad main part side.png
full.jpg

the main part of the hydroponics tower is very generic but there is not much of a change however I'm going to add all the Gcode and STL here.

Supplies

3D printer

2 inch net pos https://www.amazon.com/gp/product/B09WMPPVVK/ref=ox_sc_act_title_2?smid=A3IXZXVL6QUB96&th=1

1.5” Rockwool Starter Plugs for Hydroponics, Rockwool Grow Cubes https://www.amazon.com/gp/product/B08W59XXJ7/ref=ox_sc_act_title_1?smid=AEKMAW72OW8DX&th=1

10 Feet - 5/16" ID 7/16" OD Clear Vinyl Tubing Food Grade 

https://www.amazon.com/gp/product/B01CGVJ9QG/ref=ox_sc_act_title_9?smid=A3H0I9O4N1M30R&th=1

AQUANEAT Submersible Water Pump, 50GPH

https://www.amazon.com/gp/product/B07W59VCJ3/ref=ox_sc_act_title_10?smid=A1W7R5UJZCLN8X&th=1

each tower will cost about 100 everything over 400 to 500 each


Getting the STLs and or Gcode

water distrbution top.png
water intake plug.png
water distrbution buttom.png

I would like to toot my own horn about the water distribution with over flow part works great however you might need to clean up the holes as needed.

Printing

unnamed.jpg
unnamed.jpg
unnamed.jpg
unnamed.jpg

This part take some time but it is worth it for me it was about 2 day each part.

Assemble!!!

Assemble.jpg
mini made.jpg
full.jpg

all the parts should fit together and be able to to be checked with each other but if you have any questions feel free to reach out I printed a mini and made sure they all fit in openScad as well as tinkercad.