How to Watch Starwars With Computer Symbols on Command Prompt
by CrazyCory564 in Circuits > Software
269680 Views, 125 Favorites, 0 Comments
How to Watch Starwars With Computer Symbols on Command Prompt
This is just a wierd trick I learned so I decided to post this. You can watch most of the beginning of the first Starwars movie, which is episode IV from command prompt made by some guy. It's pretty cool.
DISCLAIMER: I am not taking credit for this. I am in no way responsible for making or being a part of making this trick. I am just doing my part in letting you all know about it.
DISCLAIMER: I am not taking credit for this. I am in no way responsible for making or being a part of making this trick. I am just doing my part in letting you all know about it.
Opening Command Promp
Go to the start menu, go to accessories, and command prompt should come up.
Type in the Command
The command to watch the starwars movie is the following:
Telnet Towel.blinkenlights.nl
Type that in letter for letter (including the space between Telnet and Towel) in command prompt. Two messages should come up for a little bit, then the movie will start playing.
Telnet Towel.blinkenlights.nl
Type that in letter for letter (including the space between Telnet and Towel) in command prompt. Two messages should come up for a little bit, then the movie will start playing.
The Result
Now the fun part- Just sit back and watch. It's poor quality due to the fact it was made frame by frame with computer symbols, but this must have taken the guy who made this forever.