How to Tie a Double Sheet Bend
![IMG_0895.JPG](/proxy/?url=https://content.instructables.com/FDN/4G41/HO7XGTIJ/FDN4G41HO7XGTIJ.jpg&filename=IMG_0895.JPG)
This knot is use to tie two ropes of the diffrent diameter together. This knot is stronger than the Sheet Bend knot
![IMG_0881.JPG](/proxy/?url=https://content.instructables.com/FWW/8B0U/HO65DS3O/FWW8B0UHO65DS3O.jpg&filename=IMG_0881.JPG)
Make a bright in the larger of two ropes to be joined.
![IMG_0885.JPG](/proxy/?url=https://content.instructables.com/FC9/RCQE/HO65DS3Y/FC9RCQEHO65DS3Y.jpg&filename=IMG_0885.JPG)
Tuck the second line and tuck it up through the bight
![IMG_0887.JPG](/proxy/?url=https://content.instructables.com/FX7/7I8P/HO65DS48/FX77I8PHO65DS48.jpg&filename=IMG_0887.JPG)
Bring the end around and beneath the bight in the other rope.
![IMG_0891.JPG](/proxy/?url=https://content.instructables.com/F4X/WGK0/HO7XGTI3/F4XWGK0HO7XGTI3.jpg&filename=IMG_0891.JPG)
Tuck the working end beneath itself so both short ends are located on the same side of the knot.
![IMG_0893.JPG](/proxy/?url=https://content.instructables.com/F5Y/JN24/HO7XGTID/F5YJN24HO7XGTID.jpg&filename=IMG_0893.JPG)
Bring the working end around and beneath the bight and its own standing line once again, keeping it to the right of the original pass.
![temp_307674137.jpg](/proxy/?url=https://content.instructables.com/FB4/TPTA/I2QU8EKF/FB4TPTAI2QU8EKF.jpg&filename=temp_307674137.jpg)
After that tighten the knot and you're done :D good luck trying