How to Remove Wallpaper the Easy Way
by hip2thrift in Workshop > Home Improvement
227420 Views, 168 Favorites, 0 Comments
How to Remove Wallpaper the Easy Way
One of the most dreaded renovation projects for many people is wallpaper removal. In the past I've many different recommended methods, such as: special sprays or renting a steamer, none of which worked without lots of hours and tears. This time around, I was armed with patience and ready to have the same challenges as before. After some more research, I found lots of good tips, some of which involved going and buying all kinds of nifty tools like a wall paper scorer. I did not want to go to the store and so I kept looking for home remedies. I decided to go with the fabric softener idea and now swear by its efficiency.
Take a large bucket and mix in equal parts warm water and fabric softener. I poured the mixture into a spray bottle (I had to pour out the leftover windex and rinse the bottle).
I thought I could just spray the wallpaper and then it will soften, and then I'd be able to just peel it off. Well, not really. Old wall-paper (in this case probably the '80s) has :
- a vinyl top layer and no amount of anything will take that off
-and a layer of kinda fuzzy wallpaper backing.
So, the best way is to peel off all of the vinyl. In most areas it all came off in strips. I did that until all that remained on the walls was the paper backing.
I proceeded to spray the wall in sections and it was like a miracle - it all came off.
Although it came off easily, it was still a time consuming activity. After a while, spraying was really hurting my hand, so I just poured my mixture into a paint tray and rolled with a paint roller. MUCH faster, but messier. Also, when you get close to outlets, turn the lights off. Because this bathroom doesn’t have any windows, it was completely dark, so I brought a table lamp that I plugged in the hallway outside the bathroom.
After I was done taking off the wallpaper, I cleaned all the crap off the floor and wiped the walls with warm water and a sponge, to remove any glue residue and any left over fuzz. Vois-la!!! All ready for priming.
Above are the before and after pictures.