How to Make Your Own Canvas Tote

by lavac in Craft > Sewing

181425 Views, 74 Favorites, 0 Comments

How to Make Your Own Canvas Tote

A very simple and easy way to make your own custom canvas tote which you can design the front of after!

Instruc_0041.JPG
Start off with your basic tools scissors, pins, ruler, seam ripper, fabric crayon, and a sewing machine (which is not shown).

Instruc_0017.JPG
You can make about 2 bags with 1 meter (folded).
I cut out a piece that is 33" x 31".

Instruc_0014.JPG
Then fold the 33" x 31" canvas in half, it is now 16 1/2" x 15 1/2".
The fold is going to be the bottom.

Instruc_0005.JPG
For the straps on the bag, cut 2 16" long straps.

Instruc_0018.JPG
Instruc_0019.JPG
Instruc_0020.JPG
Instruc_0023.JPG
At the top, fold the canvas down 1" from the edge, pin it, then repeat on the other side.
Then sew about .5mm from the edge. Removing pins as you go along.
Remember to double stitch at the beginning and end.

Instruc_0027.JPG
After finishing the top fold stitches, you're going to sew the sides of the bags together.
Pin the sides together.
Leave about 1mm from the edge of the fabric when sewing.

Instruc_0035.JPG
Instruc_0032.JPG
On the bottom corners of your bag, you're going to pinch the corners and then sew across like shown.
Measure properly for both of the corners and pin it down to make it easier.
Sew about 3" across the corners. Repeat on the other bottom corner of the bag.
This gives your bag more of a bottom/volume.

Instruc_0036.JPG
Instruc_0037.JPG
It should look like this.

Instruc_0039.JPG
Instruc_0038.JPG
Take one of the straps and measure about 4" to the side, and lined up to the 1" fold of the top of the bag.
Pin the strap down and repeat on each sides. Like shown.

Instruc_0011.JPG
Instruc_0012.JPG
Sew the straps down securely , by sewing around the edge of the strap, making a square, then sew from corner to corner of the square, like an X.
It should look like a box with an X in the middle, like shown.
Repeat three more times with the other straps.

Instruc_0007.JPG
Instruc_0009.JPG
It should look like this, clean up any loose strings, then flip it inside out, and feel free to paint/design whatever you like on your bag.