How to Make the Chichen Itza (cardboard Model)

Have you wonder how to make the Chichen Itza model out of only cardboard and a little bit of other stuff now you can! what you will need is:

glue or tape

cardboard

scissors

A few block of wood

the first thing you need to do is to build the platform depending on how big you want the pyramid to be have to be a least some of the grass showing on each corner (the pyramid will be in the middle)

If you look at the picture above you will see that it is like a stair case At the points wear there is not stair cases

so we will be cutting out peice by peice that part of the pyramid.

2 for each beside the top use as many as you can until you get to 2 inches tall.

Well I had trouble figuring out this to so what I did was got about an inch tall wood that was already broken by myself at a taekwondo class and leveled it out that way when I got to the top I couldn't break 1/2 of the already broken 1 inc h wood so I found something smaller to do the 2nd two pieces at the top. So that is how I leveled it out

Yes we do close up the sides how I did it is just made the sides a little bit smaller then the opening,but not too small then it will fall out easily.

fold the cardboard like fans and you got your stars!

Now that you have finished your Chichen Itza now it is time you show it to me in the comments, please.