How to Make a Small Case for Projects or Anything You Want.

by kondzio29 in Circuits > Electronics

5098 Views, 23 Favorites, 0 Comments

How to Make a Small Case for Projects or Anything You Want.

S5000052.JPG
It's great case for small projects, or to keep your stuff in good order.
I use it for keep my electronic parts.You can make in it a small circuit board or something.


it's the final result

What You Must to Have.

S5000010.JPG
S5000008.JPG
S5000009.JPG
You must have:
-Cable holder/organiser
-Glue gun
-Utility knife (or other sharp tool)
-Marker
-Setsquare (I don't know if this word is good)
-This instructable


Cutting Holder.

S5000024.JPG
S5000025.JPG
You must cut the holder and add to the length of 3cm
I cut 3 inches of cable holde r
and so my box will have a 4.5 centimeter.

Sidewall

S5000037.JPG
S5000032.JPG
You must cut the 1,5 centimeter of holder like on the picture

Bending the Sidewall.

S5000041.JPG
S5000042.JPG
S5000044.JPG
S5000047.JPG
Bend the wall we cut before, like on the picture...
And do it on the other side.


Last Step

S5000050.JPG
Cut the top of cable holder and put it on box.

S5000051.JPG
S5000052.JPG
 Yes we finish!

Thanks for reading.
Visit my website:https://sites.google.com/site/tworzeteam/
And rate my instructable.
Tell me if I made a mistake in my text.
By kondzio29