How to Make a (no-sew) Pet Bed

Recently, a friend's mom gave me a boat load of fabric. She gave me three or so yards of this awesome, fuzzy, purple, cheetah-print which I thought would be perfect for a cat bed! I made it for my friend's cats and one of them actually liked it... Unlike the other cat, but that's okay. :)
Here's how I made it and how you can make it too:

Cut out two pieces of your fuzzy fabric way bigger than you think you'll need. My pieces were 30" x 17" and I thought that would be way too big, but I definitely could have gone larger. You'll also need a significant amount of poly-fil and a pair of scissors.

Place the pieces wrong sides together and cut slits all the way around. Also cut a square out of the corners, like the picture below. You'll want your strips to be 1" apart and at least 4" long, but probably longer.

Tie the strips almost all the way around, but make sure to leave a few untied.

Stuff with some poly-fil and tie the rest of the strips together. I didn't stuff it all the way just because I figured a cat would be more comfortable with a little dip/well in the center of the pet bed.

Now all you have to do is put a cat on it!