How to Make a Mini Tripod With the Safety Razor

by romanursuhack in Circuits > Cameras

3897 Views, 40 Favorites, 0 Comments

How to Make a Mini Tripod With the Safety Razor

561a776b4936d449fb000814.jpeg

Step 1. Cut a triangle out of a wooden desk. The sides of this triangle must bulge out of the safety razor edge.
Step 2. Drill a hole in the center of the triangle, and pass a bolt through this hole.
Step 3. Stick the razor blades.
Twist in the bolt to install the camera.

Video & Photo Instructables

https://youtu.be/fxr83CAiRAo



Sometimes Camera Tripod Is Irreplaceable, But Not Everyone Is Able to Buy It, As It's Quite an Expensive Thing, and It's Needed Rarely.

Screen Shot 2015-10-10 at 9.34.14 AM.png
Screen Shot 2015-10-10 at 9.35.16 AM.png
Screen Shot 2015-10-10 at 9.35.29 AM.png
Screen Shot 2015-10-10 at 9.35.46 AM.png
Screen Shot 2015-10-10 at 9.36.14 AM.png

However You Can Make a Tripod on Your Own With the Used Safety Razor.

Screen Shot 2015-10-10 at 9.37.12 AM.png
Screen Shot 2015-10-10 at 9.37.34 AM.png
Screen Shot 2015-10-10 at 9.37.42 AM.png
Screen Shot 2015-10-10 at 9.37.53 AM.png
Screen Shot 2015-10-10 at 9.38.11 AM.png

It's Better to Use Safety Razor With Rubber Handles.

Screen Shot 2015-10-10 at 9.38.46 AM.png
Screen Shot 2015-10-10 at 9.39.22 AM.png
Screen Shot 2015-10-10 at 9.39.06 AM.png
Screen Shot 2015-10-10 at 9.38.29 AM.png
Screen Shot 2015-10-10 at 9.39.58 AM.png